Skip to Content
2084 Towne Mill Ave.
Canton, GA 30114

Pipe Bursting in Atlanta, GA, and the Surrounding Areas

Pipe Bursting Atlanta

Pipe bursting is a trenchless pipe replacement method. This method does not require the digging up of the original pipeline as other excavation-based methods do. Previous methods involved digging a trench to uncover the entire line just to determine the cause of any symptoms noticed by the homeowner. Digging the trench required large machinery and a large workforce. Landscapes, driveways, and walkways were disrupted or destroyed. A great deal of time was spent on the process. The cost was very high due to the amount of time, workforce, and machinery required. At The Pipe Medic, your trusted pipe repair company in Atlanta, GA, and the surrounding areas, we offer the optimal solution.

The Pipe Medic provides efficient pipe bursting services to these locations:

State-of-the-Art Pipeline Replacement

Using pipe bursting in Atlanta, GA, and the surrounding areas, The Pipe Medic is able to replace the old, damaged pipe with a new one that is the exact same diameter, without digging a trench to do the work. The process is measured in hours not days. No large equipment or workforce is necessary.

Our pipe bursting method consists of a hydraulic pump, a pulling machine, a chain, and a bursting head. The bursting head is a torpedo-shaped attachment that is connected to the front of the new, incoming pipe. There are multiple sizes to choose from, some supporting a tight entryway, some with blades. The purpose of the bursting head is to burst and break up the original pipe, pushing the fragments safely into the surrounding soil, and allowing the new pipe to take its place.

The chain runs from the bursting head at the start of the new pipe, through the old pipeline, to the pulling machine at the far end. The pulling machine has rods that lift up and down, pulling the chain as they lift, sliding down the retrieved cable as they drop. The machine then re-engages to pull another length of the cable, as well as the attached head and new pipe, through the old pipe’s location. The rods gain the pressure to rise and drop from the hydraulic pump. Once this process is completed, a new pipe resides exactly where the old pipeline existed. The landscape and hardscape remain unaffected.

Atlanta Pipe Bursting

Trenchless Pipeline Repairs

Pipe bursting is one of many methods of trenchless pipe repair in Atlanta, GA that The Pipe Medic uses to support our Georgia clients. All of them leave the surface of the landscape undisturbed. Sewer camera inspections are used to diagnose pipeline concerns. We use a robotic, waterproof camera to inspect the inside of the pipeline and to send video to our technician on the surface. When debris or mineral accumulations create snags or rough pipeline walls, conditions that slow down wastewater flow, a hydro jetting procedure is utilized. Hydro jetting uses highly pressurized water to scour clean the walls of the pipeline and to burst apart and rinse away and snags. Cured in place pipe lining can be used when a crack requires patching. With the help of our sewer camera inspection services in Atlanta, GA, and the surrounding areas, we are able to accurately determine whether the problem has indeed been fixed. 

The Pipe Medic is proud to serve the state of Georgia with expert and understanding staff. We work with residential, commercial, and industrial buildings. Our team is sensitive to each client’s needs and offers budget-friendly and speedy repairs that do not disturb the building’s workflow or a home’s routine. We offer a wide range of quality services, including drain cleaning in Atlanta, GA. Call us now for a consultation. We offer:

COPYRIGHT © 2018-2020 THEPIPEMEDIC.COM. ALL RIGHTS RESERVED.
POWERED BY TRENCHLESS MARKETING.
Trenchless Marketing Logo

Call us at 770-628-5451